Chapter 5
•Service Hunt – In this mode, upon the loss of a service the unit will select the first available service from the service list.
•Service Drop – In this mode, if a service is lost its selection data will be dropped such that the service will not be selected again upon reacquisition.
•Major/Minor Tracking – In this mode, the service will be selected/maintained using the major and minor channels referenced from the VCT.
•PID Flush – Checking this box will allow removing the component selections from the
•SI Mode – allows selection of auto detect or force DVB or ATSC SI table filtering.
•Detected SI Mode – displays the SI mode detected from currently extracted SI tables.
•User PCR PID – allows the input of the current User PCR PID.
•AR (Aspect Ratio) Conversion – allows the selection of the type of aspect ratio conversion required from a
•Use AFD/Bar (Active format Description) Data – checking this box allows the use of AFD/BAR data to automatically perform aspect ratio conversion.
•AFD/Bar Data Timeout Period – checking this box will cause the AR conversion to drop to the default setting if AFD/BAR data is not available.
•RX Delay 4:2:0 – allows the input of a Receiver delay value in the offset range of
•RX Delay Mode – allows the selection of the Receiver delay mode from a drop- down menu.
•Test Pattern - allows the selection of the test pattern displayed from a drop- down menu.
•Video Fail Mode - allows the selection of the display shown in the event of video signal failure from a
•Video 625 Standard - allows the selection of the 625 composite video standard from a
•Video 525 Standard - allows the selection of the 525 composite video standard from a
•User PID – allows the input of the user PID for video decoding.
•User Std - allows the selection of the user video standard from a
EN/LZT 790 0005 R1A |