Chapter 6

6.1.1DVB-S2 Input Card (RX8200/HWO/DVBS2)

This option is only available for the RX8200 Receiver and is fitted as standard to the base models of RX8310, 8315 and 8330.

With accompanying software options, the DVB-S2 Input card supports DVB-S, QPSK demodulation and DVB-S2, QPSK and 8PSK demodulation.

RX8200/HWO/DVBS2 provides four L-band inputs.

Cautions!

The receiver provides DC power (refer to Chapter 3, Operating the Equipment Locally) via the active L-Band input connector to drive an LNB (Low-Noise Block Down-Converter). Do not connect equipment other than an LNB to this connector. Failure to do this may result in damage to the external equipment.

The F-type Connector is not suitable for repeated connection and disconnection. When intended for use in this way, fit a sacrificial connector and connect to it.

6.1.28-VSB Input Card (RX83XX/HWO/8VSB)

This option is only available for the RX8320 ATSC Broadcast Receiver. The 8-VSB Input card supports ATSC demodulation.

6.1.3Gigabyte 100/1000Base T Ethernet (RX8XXX/HWO/IP/GIGE)

This option is available for the RX8320 ATSC Broadcast Receiver and the RX8200, 8315, 8320 and 8330 DVB Receivers.

The 100/1000Base T Input card supports an MPEG transport stream over IP and SMPT 2022 Pro-MPEG FEC with license key. Two 100/1000 Base T inputs are provided and this system also has a very low latency level.

6.1.4G.703 ATM Input Card (RX8XXX/HWO/G703)

This option is available for the RX8320 ATSC Broadcast Receiver and the RX8315, 8320 and 8330 DVB Receivers.

The G.703 ATM input card provides E3 or DS-3 inputs and offers a choice of 34 or 45 Mbps rates.

6.1.5MPEG-2 4:2:2 SD Decoding Card (RX82XX/HWO/MP2/422)

This option is only available for the RX8200 DVB Receiver.

EN/LZT 790 0005 R1A

6-5