Chapter 3

3.5.3.2.6.52.2.6.5 Row Port 1

To view and edit the Row Port 1, press the T (Down) key. The following screen is displayed:

STREAM 1 ROW PORT 1

2.2.6.400000

To edit the Row Port 1 value:

1.Press the Edit key. The cursor appears below the first character of the displayed value.

2.Edit the parameter value as required using the W (Back) and X (Forward) keys to select each digit in turn, and then using the S (Up) and T (Down) keys to increment or decrement the digit.

3.Press Save to save the new settings or Edit to abandon the operation and return to the current setting.

This is the last of the Stream 1 screens. To return to the top level Stream 1 screen, press the W (Back) key.

3.5.3.2.72.2.7 Stream 2/ Unicast Enable 2

To view and edit the Unicast Enable 2, press the T (Down) key. The following screen is displayed:

STREAM 1

UNICAST ENABLE 2

 

2.2.7

TRUE

>

 

 

 

The Unicast 2 may be enabled/disabled and all of the Stream 2 parameters viewed and edited (where possible) as descibed in Section 3.5.3.2.6. When complete, press the W (Back) Key to return to the top level Stream 2 screen.

3.5.3.2.82.2.8 Alarms/ Alerts

To view the unit alerts, press the T (Down) key. The following screen is displayed:

ALARMS ALERTS2.2.8Both ports link down, Both ports no data3.5.3.2.8.12.2.8.1 Both Ports Link Down/ No Data

To view the port alerts, press the X (Forward) key. The following screen is displayed:

ALARMSBOTHPORTSLINK DOWNAlarm

2.2.8.1

BOTH

PORTS

NO DATA

Alarm

 

 

 

 

 

3-36

EN/LZT 790 0005 R1A