Ericsson RX8000 Edit, Save, Edit, Edit, SETUP, |Same, SETUP, |MAC MODE, |IP ADDRESS, 2.2.4.1|00500, |000.000.000.000, 3.5.3.2.32.2.3 Network, To change the MAC Mode:

Chapter 3

This is the last of the Network 1 screens. To return to the top level Network 1 screen press the W (Back) Key.

3.5.3.2.32.2.3 Network 2

From the Network 1 screen 2.2.2, press the T (Down) key. The following screen is displayed.

NETWORK 2	IP ADDRESS 2
2.2.3	000.000.000.000	>

The Network address 2 may be edited and all of the Network 2 parameters viewed and edited (where possible) as described in Section 3.5.3.2.2. When complete, press the W (Back) Key to return to the top level Network 2 screen.

3.5.3.2.42.2.4 Setup/MAC Mode

To view and edit the MAC Mode, press the T (Down) key. The following screen is displayed:

SETUP	MAC MODE
2.2.4	Same	>

To change the MAC Mode:

1.Press the Edit key. The cursor appears below the first character of the displayed option.

2.Use the S (Up) and T (Down) keys to toggle between the Same and Different options.

3.Press Save to save the new settings or Edit to abandon the operation and return to the current setting.

3.5.3.2.4.12.2.4.1 De-Jitter Buffer Level

To view and edit the De-Jitter Buffer Level, press the X (Forward) key. The following screen is displayed:

SETUP DE-JITTER BUFFER LEVEL

2.2.4.100500To edit the De-Jitter Buffer Level:

1.Press the Edit key. The cursor appears below the first character of the displayed option.

2.Edit the parameter value as required using the W (Back) and X (Forward) keys to select each digit in turn, and then using the S (Up) and T (Down) keys to increment or decrement the digit.

3-30 EN/LZT 790 0005 R1A