Ericsson RX8000 2.7.3ASI OUT Connector (RX8310/15/20 only), Item, Item, Specification, Specification

Chapter 2

Cautions!

The receiver provides DC power (see Chapter 3, Front Panel Control for details of menu option) via the active L-band input connector to drive an LNB. Do not connect equipment other than an LNB to this connector. Failure to do this may result in damage to the external equipment.

The F-type connector is not suitable for repeated connection and disconnection. When intended for use in this way, fit a sacrificial connector and connect to it.

Table 2.3 RF IN Connector

Item		Specification
Connector type		F-type 75 Ω female socket
Connector designation		RF IN 1
		RF IN 2
		RF IN 3
		RF IN 4
LNB Power Supply		See Cautions! above.
Pin-outs	Centre	Input
	Shield	Ground/Chassis

2.7.3ASI OUT Connector (RX8310/15/20 only)

The unit provides two coaxial ASI digital outputs depending on the user selectable configuration.

Table 2.4 ASI OUT Connector

Item		Specification	ASI OUT
Connector type		BNC 75 Ω female socket
Connector designation		ASI OUT 1
		ASI OUT 2
Pin-outs	Centre	Output
	Shield	Ground/Chassis

EN/LZT 790 0005 R1A 2-11