Chapter 3
To choose the Select input type:
1.Press the Edit key. The cursor appears below the displayed type (ASI shown above).
2.Use the S (Up) and T (Down) keys to toggle between the available types: ASI, 8VSB and AUTO (dependent on model type).
3.Press Save to save the new settings or Edit to abandon the operation and return to the current setting.
To choose the Primary input:
| 1. | Move to the Primary Input function using the X (Forward) key |
| 2. | Press the Edit key. The cursor appears below the displayed type (ASI shown |
|
| above). |
| 3. | Use the S (Up) and T (Down) keys to toggle between the available types: ASI |
|
| and 8VSB (dependent on model type). |
| 4. | Press Save to save the new settings or Edit to abandon the operation and |
|
| return to the current setting. |
3.5.4.2 | 2.2 | 8VSB |
To access this function, press the T (Down) key. The following screen is displayed:
|
| 8VSB | CHANNEL 61 | SNR 0.00dB |
| |
|
| 2.2 | FREQUENCY | 755.000 MHz |
| |
|
|
|
|
| ||
| To choose the Channel to be monitored: |
|
| |||
| 1. | Press the Edit key. The cursor appears below the the first character of the | ||||
|
|
| current channel number. |
|
| |
| 2. | Use the S (Up) and T (Down) keys to select the required number. | ||||
| 3. | Press Save to save the new settings or Edit to abandon the operation and | ||||
|
|
| return to the current setting. |
|
| |
3.5.4.3 | 2.3 | 8VSB CTRL |
|
|
| |
| To access this function, press the T (Down) key. The following screen is displayed: | |||||
|
|
|
|
| ||
|
| 8VSB CTRL | DIRECT FREQUENCY | DISABLED |
| |
|
| 2.3 | AUTO TUNE | DISABLED |
| |
|
|
|
|
| ||
| To enable/disable the Direct Frequency function: |
|
| |||
| 1. | Press the Edit key. The cursor appears below the current option. | ||||
| 2. | Use the S (Up) and T (Down) keys to toggle between the Enabled/Disabled | ||||
|
|
| options until the required option is displayed. |
|
|
EN/LZT 790 0005 R1A |