Chapter 5

Figure 5.20Input > IP Input Web Page

The following user-editable fields are displayed on this web page:

User-editable fields in the IP Interface Section:

•IP Address 1/2 – allows the user to input the relevant IP address.

•Subnet Mask 1/2 – allows the user to input the relevant Subnet Mask address.

•Default Gateway 1/2 – allows the user to input the relevant Default Gateway address.

•VLAN (Virtual Local Area Network) Tag 1/2 - allows the user to input the relevant VLAN Tag Value.

•VLAN Enable 1/2 - allows the user to enable/disable the VLAN.

•ICMP (Internet Control Message Protocol) Enable 1/2 – allows the user to enable/disable network 1/2 to ping the input (and Port 1/2).

•SNMP Enable – allows the user to enable/disable the SNMP facility via the input port.

•IP params to XML output – allows the user to enable/disable the sending of the IP parameters out as XML from the input port.

User-editable fields in the Card Config Settings section:

•ARP Enable 1/2 – allows the user to enable/disable the ARP on Network 1/2.

•Ethernet Line Mode 1/2 – allows the user to set the Ethernet line mode for Network Interface 1/2.

•MAC Mode – allows the user to change the current MAC Mode.

User-editable fields in the Listening Stream Section:

•FEC Enable – allows the user to enable/disable FEC. This facility is only available when FEC is licensed.

5-20

EN/LZT 790 0005 R1A