SUPREMA 2001 - OPERATION & SERVICE MANUAL

PROGRAMMING THE EQUIPMENT

!Note:

While in the “SETUP ” mode, pressing the “SETUP ” button once again will exit this mode and save all changes made to the programming.

The first section of the "SET-UP" mode displays all the counters. These counters can be reset while in this mode. The following table lists all the counters in the order in which they appear at the beginning of the "SET-UP" mode;

CASHBOX TOTAL

VEND TOTAL

(RESETTABLE) VEND TOTAL RESET

COIN DISPENSE ---appears only in "COIN" mode

TOTAL / SELECTION

FREE VEND TOTAL

VIEWING AND RESETTING COUNTERS

!Note:

The “VEND TOTAL”

counter can only be reset by performing a

“TOTAL COUNTER

RESET”. Page 15.

1.Enter the "SET-UP" mode.

a)Press the "SET-UP"mode button on the interior door panel. The display will now read,

CASH BOX

TOTAL= $XXXX.XX

∃Tip:

The “VEND TOTAL” counter can also be viewed by pressing the “COFFEE”, “50/50” and “DECAF” buttons simultaneously. It will appear immediately after the product status is displayed.

b)To reset the "CASHBOX TOTAL", press the "START" button. To scroll to the next counter, press the "UP" button on the hidden menu scroll buttons.

c)The next counter is the "VEND TOTAL" counter. This counter can only be viewed and it is not possible to reset it at this point. To scroll to the next counter, press the "UP" button on the hidden menu scroll buttons.

d)The next counter to be displayed is the "VEND TOTAL RESET" counter (resettable). Press the “START” button to reset, if needed.

e)The next counter to be displayed is the "TOTAL/SELECTION" counter. Press the “START” button to reset the counters.

Please note that a confirmation message will appear after “START” is pressed. To reset the counters, press “START” again. To cancel the reset, press the “COFFEE” button.

f)The next counter to be displayed is the "FREE VEND TOTAL" counter. Press the “START” button to reset, if needed.

Suprema 2001 - Operation & Service

July 6, 2001

Page 13 of 60