SUPREMA 2001 - OPERATION & SERVICE MANUAL

TOTAL COUNTER RESET

This software contains a special access code that enables the service person to reset all the counters to zero, including the "VEND TOTAL" counter. This operation should be performed before a unit is re-installed in the field.

1.To perform a "TOTAL COUNTER RESET",

a)Switch the power to the coffee maker "OFF" (switch is at the rear of the unit).

b)Press the "SET-UP" mode button on the inside door panel and keep it depressed.

c)With "SET-UP" mode button pressed, switch power to coffee maker "ON".

d)The following message will now appear on the display,

ENTER ACCESS

CODE:

e) Enter the "TOTAL COUNTER RESET" access code (described below).

"TOTAL COUNTER RESET" ACCESS CODE

The following is the factory preset "TOTAL COUNTER RESET" access code - press the following in the sequence outlined below;

1

COFFEE

2

MILD STRENGTH

3

LARGE CUP

4

MEDIUM CUP

5

SMALL CUP

 

 

Once the access code has been entered, a counter will appear on the top left of the display, and will quickly increment from 0 to 255. Once this is complete, press “START” for the brewer to cycle once to re-establish its home position.

!Note:

When the reset is complete, the unit will automatically exit to the “standby” mode, and the internal light will remain “ON” temporarily.

Suprema 2001 - Operation & Service

July 6, 2001

Page 15 of 60