SUPREMA 2001 - OPERATION & SERVICE MANUAL

LOCKING THE COUNTERS

This feature will allow you to lock the counters, preventing the caretaker from resetting them. With this lock enabled, it will not be possible to reset any of the counters when in the "COUNTER" mode. If the counters need to be reset, it will be necessary to go to this menu to unlock them first. This obviously requires the "SET-UP" mode access code, limiting the number of people that can go into the programming to unlock the counters. Once they are unlocked, they can be reset using the normal counter resetting procedures outlined in this manual. Please note that this feature is disabled when the equipment is shipped from the factory.

1.To lock all the counters, press the "UP" button on the hidden menu scroll buttons and scroll until the following message appears,

LOCK COUNTERS

PRESS <START>

a)Press the "START" button to enter the set mode.

b)Using the hidden setting adjustment buttons, select “ON” to lock the counters, or “OFF” to unlock them.

c)To save, press either one of the two hidden menu scroll buttons once the desired function is displayed on the LCD.

SETTING THE FORCE VEND FEATURE

!Note:

This feature is intended mainly for the Canadian market and prevents people from using the Suprema as a ‘change maker’ (usually done by inserting a $1 or $2 coin, then pressing the coin return button to get change in quarters).

There are three different settings that can be programmed for this particular feature. This feature can be set in the "SET-UP" mode.

1.To set the “FORCE VEND” feature, press the "UP" button on the hidden menu scroll buttons and scroll until the following message appears,

FORCE VEND

PRESS <START>

a)Press the "START" button to enter the set mode.

b)Using the hidden setting adjustment buttons, select one of the following settings.

•“ON – NORMAL” - the coin return feature on the Coinco is completely disabled, regardless of what coins are inserted.

•“ON – SMART” - the coin return feature is disabled only when a $1 or $2 coin is inserted.

•“OFF” - the force vend feature is disabled and the unit will function normally.

c)To save, press either one of the two hidden menu scroll buttons once the desired function is displayed on the LCD.

Suprema 2001 - Operation & Service

July 6, 2001

Page 29 of 60