SUPREMA 2001 - OPERATION & SERVICE MANUAL

STEP 2 - TRANSFERRING SETTINGS FROM THE DATA LINK DEVICE TO A SUPREMA

1.Connect the Data Link phone jack harness to the free connector on the back of the front board.

2.Press the "SET-UP" button on the back of the front board.

a)The following message will appear on the display,

COPY DATA LINK

TO SET-UP

3.Press the “START” button on the Suprema front selection panel.

a)A list of options to be transferred will then appear on the display. The first option is “COPY ALL – SET-UP” (defaulted to “YES”) will transfer “ALL” the settings. If the “UP” button is pressed, “NO” will appear. Press “START” to get to the next option, and repeat as necessary. We recommend that the “ALL” option be used to prevent any possible conflicts in the set-up.

STEP 3 - TRANSFERRING CUSTOM MESSAGES TO A SUPREMA

(may not be required)

If multiple Suprema coffee makers require the same custom message to be displayed, this too can be transferred from one unit to several others. Simply program the custom message on the first unit, and perform STEP 1 on the previous page (Transferring Settings to the Data Link Device). Once done, follow the procedure outlined below. This procedure will transfer ONLY the custom message. Please note, however, that performing STEP 2 (above) will transfer all settings, including custom messages.

1.Connect the Data Link phone jack harness to the free connector on the front board.

2.Press the "SET-UP" button on the back of the front board.

a) The following message will appear on the display,

COPY DATA LINK

TO SET-UP

3. Press the bottom scroll button to the right of the “START” button twice.

a) The following message will appear on the display,

COPY CUSTOM MSG.

TO SET-UP

4.Press the “START” button on the Suprema front selection panel.

a)The custom message in the Data Link device will now be transferred to the Suprema "SET-UP".

Page 38 of 60

July 6, 2001

Suprema 2001 - Operation & Service