SUPREMA 2001 - OPERATION & SERVICE MANUAL
MESSAGE | POSSIBLE CAUSE | CORRECTIVE ACTION |
|
|
|
| Coffee maker is in "standby" mode. | ( None required. |
SELECT – THEN | ||
PRESS <START> |
|
|
TANK IS FILLING
PLEASE WAIT
Indicates that the water tank has not yet been filled with water.
(Please wait a few minutes for the tank to fill. If it takes too long, a "PLEASE CHECK WATER SOURCE" message will appear.
TANK OVERFLOW! | The rear overflow catch may be full of | |
water. | ||
OPEN AND DRY CATCH | ||
|
(Clean and dry the tank overflow catch.
(Verify the water level probes. They may be covered with lime or scale. Clean the probes or delime the water tank components.
(Inlet valve may be leaking, constantly allowing water to enter the tank. Replace the inlet valve.
(Water in the tank may be boiling. Turn temperature down to
(If message cannot be cleared, rear board may be wet. Replace the board and let the wet one dry overnight.
WATER OVERFLOW | The front overflow catch may be full of | |
water or coffee. | ||
EMPTY & DRY CATCH | ||
|
(Clean and dry the front overflow catch.
(The cup stand may be full of liquid. Empty and clean cup stand and catch.
(The hot water valve may be leaking. Repair or replace hot water valve.
(If the message cannot be cleared, the rear board may be wet. Replace the board and let the wet one dry overnight.
Suprema 2001 - Operation & Service | July 6, 2001 | Page 41 of 60 |