Everpure 2001 SET-UPMODE & ACCESS CODE

SUPREMA 2001 - OPERATION & SERVICE MANUAL

SET-UP MODE & ACCESS CODE

∃Tip:

To bypass the counters and go directly to the access code menu, press the hidden “DOWN” menu scroll button, after pressing the “SETUP ” button.

After scrolling past all of the counters, an access code is required to get into the "SETUP " section of the software. This section allows changes to be made to the computer programming. The procedures are outlined below.

1.Enter the factory pre-set access code.

a)Factory pre-set access code - press the following in the sequence outlined below;

1COFFEE

250/50

3 DECAF

4 HOT WATER

b) The message on the display will now read,

PRODUCT ON/OFF

PRESS <START>

2.The "SET-UP" mode has now been accessed, and changes can be made.

a)The following is the sequence of the settings that appear when you scroll through the "SET-UP" mode. Please note that there are some differences between the Regular software version and the APP software version.

Suprema Model Type	REG	APP
PRODUCT ON/OFF	●
SET PRODUCT	●	●
SET WATER	●	●
SET PRICE	●	●
ENABLE SWITCHES	●	●
SET DEFAULT	●	●
SET TOP PAUSE	●	●
SET BOTTOM PAUSE	●	●
MAXIMUM CUPS FOR CARAFE	●	●
FREQUENCY OF MESSAGES	●
SERVICE COUNTER	●
BOTTOM PAUSE DELAY	●	●
MESSAGES ON / OFF	●	●
FREE VEND KEY SWITCH	●	●
SET GROUNDS CONT.	●
CHOCO PUMP CYCLES	●	●
DOUBLE-CUPSET-UP	●	●
SET TEMPERATURE	●	●
CUSTOM MESSAGES	●
LANGUAGE	●
SET WATER LEVEL	●	●
SET POWDER MIX		●
SET POWDER BEV.		●
WATER MAX. BREWER	●
LOCK COUNTERS	●
FORCE VEND	●	●

● Available Feature

Page 16 of 60 July 6, 2001 Suprema 2001 - Operation & Service