SUPREMA 2001 - OPERATION & SERVICE MANUAL

SETTING THE POST-MIX

The post-mix feature allows the unit to brew a larger cup size than the capacity of the brewer permits. If a 12-oz cup is required, for example, the brewer can easily dispense 9 oz, but this will not be enough to fill this larger cup. With this feature enabled and properly set, the unit will brew 9 oz from the brewer as it normally does, and the remaining 2-3 oz of liquid required to fill this cup will be dispensed by the hot water valve. Both the brewed coffee and hot water will be mixed together as they are dispensed into the cup, filling the larger cup in one single cycle.

1.To enable and set the post-mix feature, it will be necessary to scroll between two of the menus in the set-up mode, and make several adjustments to each.

a)Set the coffee water timing (in the “SET WATER” menu) so that the brewer dispenses a large cup of coffee.

b)Once done, remember the coffee water timing value because it will be needed to program the post-mix. For example, the coffee water timing for a large cup on this unit is 3.5 seconds to get 250 ml (8.5 oz.).

!Note:

c)

Scroll to the “WATER MAX. BREWER” menu, and press “START”.

 

d)

Using the example above, we know that the maximum coffee water

 

 

timing on this unit is 3.5 seconds. This value has to now be entered as the

 

 

maximum in this menu.

 

 

 

 

 

This setting will now limit the water being dispensed into the brewer

 

 

(from the coffee valve) to a maximum of 3.5 seconds.

 

e)

It will now be necessary to return to the “SET WATER” menu. Using the

 

 

example above, the large cup coffee water timing was set to 3.5 seconds,

 

 

and the maximum allowable coffee water timing was also set to 3.5

 

 

seconds.

 

f)

At this point, any increase to the large cup water timing will go above the

 

 

maximum allowable coffee water timing that was set above, and that

 

 

extra water will be dispensed by the hot water valve. For example, if the

 

 

large cup coffee water timing is now raised to 4.5 seconds, 3.5 seconds

 

 

of that will be dispensed by the coffee valve, and the extra 1.0 second

 

 

will get dispensed by the hot water valve.

When a cup is now brewed, the brewer cycle will appear to function normally until the end of the cycle. At that point, coffee from the brewer and hot water from the hot water valve will be dispensed into the cup at the same time. The hot water will mix with the coffee, resulting in a larger cup of coffee than the brewer alone is capable of making.

Page 28 of 60

July 6, 2001

Suprema 2001 - Operation & Service