Panels and
Cabling
This section provides information on:
zz Installation Overview
zz Front Panel Features
zz Rear Panel Features
Installation Overview
1.Turn off and disconnect the VNM Recorder and all existing devices.
2.Mount the recorder, if necessary, as described in the Mounting section on page 72.
3.Connect any necessary devices to the recorder (see Front Panel Features below and Rear Panel Features on page 10).
4.Reconnect and power on all devices.
Front Panel Features
NOTE: | Some features listed in this user guide may not be available on some units. This |
will not affect the overall functionality of the VNM Recorder. | |
The front panel of the VNM Recorder is shown in figure 5.
1 | 2 | 3 | 4 | 5 |
6
7
Figure 5. VNM Recorder Front Panel
ASCA / SATA drive panel — This panel houses the RAID5 hard drives. One hard drive is referred to as a hot spare drive, which is a drive that is inactive until an active drive fails. When an active drive fails, the hot spare drive rebuilds the data of the failed drive so that the system can recover.
VNM Recorder • Panels and Cabling | 8 |
