7.Near the bottom of this file are two values namedst_controlIp and st_localIp0 with an IP address listed under each (see figure 16). Edit these values as follows.
zz If the VNM Recorder is the controller device, edit both values to match the IP address (eth0) of the recorder.
zz If the VNM Recorder is not the controller device, change the st_controlIp value to match the IP address of the controller device. Change the st_localIp0 value to match the IP address (eth0) of the recorder.
Edit this value to match
the IP address of the controller device.
Edit this value to match the IP address (eth0) of the VNM Recorder.
Figure 16. Config.xml Text Window
NOTE: | Be careful not to change any other values or remove any of the special |
formatting characters in this file. | |
8.Click on the save icon 
or click on the File menu and select the
Save (current buffer) option.
9.Close the text editor window and all other folder windows.
VNM Recorder • Recorder Configuration and Hardware Setup | 21 |
