Alarms Page
This page is accessed by selecting the Alarms tab on the Device List page (see page 26).
Figure 28. Alarms Page
The Alarms page enables a user to define and monitor system alarms.
Filter Settings
Figure 29. Filter Settings Panel
The Filter Settings panel allows the default settings for each alarm type to be modified.
zAlarm Type — Select the particular alarm that is to have its default setting changed.
See the Alarm Type section on page 57 for more information.
zAlarm Source — Select the device where the alarm is to change. Alarm filters may be
set for either a single, specific unit or for all VN‑Matrix 200, 225, 300, or 325 devices in
the system.
zAlarm Severity — Set the alarm severity. Each alarm condition has a default severity
which may be overwritten using the filter controls. The default setting is shown in this
drop‑down menu. See the Alarm Severity section on page 57 for more information.
zAlarm Reporting — Set the alarm to be either "reporting" or "not reporting". Each
alarm condition has a default reporting setting. The default setting is shown in this
drop‑down menu.
VNM Recorder • About Alarms 56