Launch Delay (sec)
If Launch options is set to Auto, Sprint SmartView will wait the number of seconds specified here before launching the application. The delay period begins immediately after a successful connection is made.
Note: In most cases, a delay is not necessary. It is only needed when launching an application too quickly causes a problem.
Monitor Application
Select this check box if you want Sprint SmartView to monitor this application and to take a specified action when the application is shut down.
Monitor Action
If Monitor Action is checked, this field specifies what Sprint SmartView should do when it detects that this application has been shut down.
●Manual – Sprint SmartView will not respond to the application being shut down.
●Prompt – Sprint SmartView will prompt you for a course of action.
●Restart – Sprint SmartView will restart the application.
●Disconnect – Sprint SmartView will shut down your current connection.
Monitor Cycle (sec)
Determines how often Sprint SmartView should check to see if the application is still running.
