Franklin U600 manual VPN Indicator, GPS Indicator, Automatic Mode Indicator

Models: U600

1 148
Download 148 pages 28.67 Kb
Page 15
Image 15

VPN Indicator

Click this icon to log on to a Virtual Private Network (VPN) using the settings configured on the VPN tab of the settings window. The indicator will turn orange and spin while VPN client software is being launched. It will turn yellow upon successful connection to the desired VPN.

GPS Indicator

This icon indicates whether GPS functions are enabled on your device.

The Main Window

(gray)

GPS and sharing disabled. In this state, GPS data is not received by the Sprint SmartView application.

(yellow)

GPS enabled/sharing disabled. GPS data is received by the Sprint SmartView application, but the received data is not shared with third-party GPS applications.

GPS and sharing enabled. In this state, GPS data is received by the Sprint SmartView application and data is shared with third-party GPS applications using

(white) the NMEA protocol.

Hover over this icon to view the data received from your GPS device. Click the arrow to the right of it to open the GPS Applications menu (see page 55). Click the icon itself to enable and disable GPS data sharing.

Note: This icon will not appear if your device does not contain a supported GPS receiver or if GPS has been disabled entirely by selecting the Disable GPS on Device check box on the Location/ GPS tab of the settings window (see page 98).

Automatic Mode Indicator

Normally, the Sprint SmartView software will select a network to connect to using the criteria described in “Network Profile Priority” on page 66 and then proceed to establish a connection to that network automatically. However, it will switch to manual connection mode for an individual connection technology when you manually connect or disconnect from a network that uses that technology.

The Automatic Mode Indicator lights up when the automatic connection feature is enabled. It will remain lit as long as the overall feature is enabled, even if automatic connection for specific technologies has been disabled by manually connecting or disconnecting.

Click this indicator to disable the automatic connection feature for all technology types. The indicator will dim.

Click this indicator again to re-enable automatic connection for all technology types. The indicator will illuminate once more.

The Main Window

13

Page 15
Image 15
Franklin U600 manual VPN Indicator, GPS Indicator, Automatic Mode Indicator