Launching Sprint SmartView
Once your hardware is installed and ready to connect, you may go ahead and launch Sprint SmartView by doing one of the following:
●
) on your computer’s desktop.
– or –
●In the Start menu, select Programs or All Programs > Sprint > SmartView > Sprint SmartView.
Device Activation
Some Sprint Mobile Broadband devices may require activation (programming) prior to use. If your device needs activating, Sprint SmartView will inform you and start the activation process when you connect the device. Although the activation process will vary depending on the make, model and firmware version of your device, all activations fall into one of the following categories:
●
●
If you choose to cancel activation at this time (by clicking No), you can restart activation by disconnecting the device from your computer and then attaching it again.
●Activation Wizard – For some devices, Sprint SmartView will display an Activation Wizard when the device is connected. Although such devices require a few more steps to activate than those that use the techniques mentioned above, the wizard provides clear,
Although you have the option to cancel the activation process at any time, you will not be able to use the device for data connections until it has been successfully activated. To restart activation after you have cancelled, just disconnect your device from your computer and then attach it again.
The Activation Wizard is accessible from the Tools menu by selecting Activate Device. Anytime there are problems with your connection, or for new service, you can go through this wizard.
