Fujitsu RX600 S6 manual CSS components Operating the expansion card

CSS components

Operating the expansion card

ÊInsert the expansion card fastened to the removal tool in the PCI slot.

ÊClose the expansion card lock (see position #2 in figure 23 on page 103) by folding it down. Make sure that the expansion card lock engages.

ÊIf necessary, connect the cables on the expansion card.

ÊActivate the expansion card using either the relevant PCI hot-plug software or by pressing the light-pipe switch (see position #1 in figure 23 on

page 103).

The light-pipe switch flashes green. The slot is in the enable sequence.

ÊWait until the light-pipe switch is constantly green. The slot is now powered on.

IIf the light-pipe switch continues to flash, an error has occurred.

Remove the expansion card and repeat the procedure as described above.

ÊClose the server (see "Opening/Closing the server" on page 125).

108 Operating Manual RX600 S6