Starting up and operation
5.1.1.2Indicators on the control panel
ID ID indicator (blue)
Lights up blue when the system has been selected by pressing the ID button. To deactivate, press the button again.
The ID indicator can also be activated via the ServerView Operations Manager and the iRMC S2 Web interface and its status reported to the ServerView Operations Manager and the iRMC S2.
Lights up green – and also lights up orange for less than one second – when the server is switched ON.
Lights up orange when the server is in shutdown mode (operating system shutdown) or is switched off.
Lights up yellow during power on delay.
CSS CSS indicator (yellow)
–Lights up yellow if a prefailure event was detected for a CSS component that you can fix yourself (for reasons of precaution) with the CSS concept.
–Flashes yellow if an error was detected that you can fix yourself with the CSS concept.
–Does not light up when the system is OK.
If the event is still acute after a power failure, the indicator is activated after the restart.
The indicator also lights up in standby mode.
For more information on the CSS concept, see "Customer Self Service (CSS)" on page 14.
HDD/SSD activity indicator (green)
Lights up green when an internal hard disk drive or solid state drive is accessed.
60 | Operating Manual | RX600 S6 |
