The power outputs must be connected in a driving configuration as shown on the previous page. Here are the voltage outputs to expect after the Clear Bit and Set Bit commands are given:

Output Command

Result

CBn

Vpwr = Viso

SBn

Vpwr = GNDiso

Standard Digital Outputs

The I/O banks 2-7 can be configured as optically isolated digital outputs, however these banks do not have the high power capacity as in banks 0-1. In order to configure a bank as outputs, the optical isolator chips Ux1 and Ux2 are inserted, and the digital input isolator chips Ux3 and Ux4 are removed. The resistor packs RPx2 and RPx3 are inserted, and the input resistor pack RPx4 is removed.

Each bank of eight outputs shares one I/OC connection, which is connected to a DC power supply between 4 and 28 VDC. The resistor pack RPx3 is optional, used either as a pull up resistor from the output transistor’s collector to the external supply connected to I/OC or the RPx3 is removed resulting in an open collector output. Figure A-8 is a schematic of the digital output circuit:

 

Internal Pullup

I/OCn

 

 

To DMC-3425 +5V

 

1/8 RPx3

 

1/4 NEC2505

 

 

1/8 RPx2

I/On

 

 

DMC-3425 I/O

OUTCn

Figure A-8 – Internal Pullup

The resistor pack RPx3 limits the amount of current available to source, as well as affecting the low level voltage at the I/O output. The maximum sink current is 2mA regardless of RPx3 or I/OC voltage, determined by the NEC2505 optical isolator IC. The maximum source current is determined by dividing the external power supply voltage by the resistor value of RPx3.

The high level voltage at the I/O output is equal to the external supply voltage at I/OC. However, when the output transistor is on and conducting current, the low level output voltage is determined by three factors. The external supply voltage, the resistor pack RPx3 value, and the current sinking limit of the NEC2505 all determine the low level voltage. The sink current available from the NEC2505 is between 0 and 2mA. Therefore, the maximum voltage drop across RPx3 is calculated by multiplying the 2mA maximum current times the resistor value of RPx3. For example, if a 10k ohm resistor pack is used for RPx3, then the maximum voltage drop is 20 volts. The digital output will never drop below the voltage at OUTC, however. Therefore a 10k ohm resistor pack will result in a low level voltage of

.7 to 1.0 volts at the I/O output for an external supply voltage between 4 and 21 VDC. If a supply voltage greater than 21 VDC is used, a higher value resistor pack will be required.

188 • Appendices

DMC-3425

Page 195 Page 197
Page 196
Image 196
Galil DMC-3425 user manual Standard Digital Outputs, Output Command Result
Page 195 Page 197

DMC-3425 specifications

The Galil DMC-3425 is a sophisticated motion controller known for its versatility and high performance in various industrial applications. Designed primarily for multi-axis control, it is well-suited for robotics, CNC machinery, and automated manufacturing systems.

One of the standout features of the DMC-3425 is its ability to control up to 32 axes simultaneously, providing unparalleled flexibility for complex motion tasks. This capability is enhanced by its advanced motion algorithms that ensure smooth and precise movements, essential for high-quality manufacturing and assembly processes. The controller supports a variety of motor types, including servo, stepper, and brushless motors, making it compatible with a wide range of existing equipment.

In terms of connectivity, the DMC-3425 offers an extensive selection of communication options. It supports Ethernet, RS-232, and RS-485 interfaces, allowing for seamless integration with various industrial networks, including EtherCAT and CANopen. This connectivity is vital for real-time data exchange and remote monitoring, enhancing overall system efficiency.

The controller is powered by Galil's innovative software architecture, which includes the DMC programming language. This user-friendly language enables engineers to create complex motion profiles easily, with support for trajectory generation, coordinate transformations, and PID control. The DMC-3425 also features built-in commands for motion profiling, including linear and circular interpolation, allowing for sophisticated path planning.

Moreover, the DMC-3425 comes equipped with an integrated programming environment that facilitates rapid application development. Users can simulate motion profiles before implementation, reducing downtime and minimizing errors. This environment is designed for quick learning, making it accessible even for those new to motion control.

Additionally, the Galil DMC-3425 features a robust safety architecture. It includes over-temperature detection, emergency stop inputs, and configurable limits for position and speed, ensuring safe operation in various environments.

Overall, the Galil DMC-3425 is a powerful and flexible motion controller that combines advanced technologies with user-friendly design. Its ability to handle multiple axes, extensive connectivity options, and comprehensive programming environment make it a top choice for manufacturers seeking to enhance automation and improve productivity in their operations.
Top Page Image Contents