GE P485 instruction manual Software overview, Introduction, Installation procedure

GE Consumer & Industrial

P485 Modbus to Profibus

Converter

Chapter 4: Software overview

Introduction

DESCRIPTION EnerVista P485/D485 Setup is a PC-based configuration software used to describe the protocol and communication properties for a serial network. When the configuration is finished and the functionality is tested, it is possible to send memory allocation information to a printer using EnerVista P485/D485 Setup.

EnerVista P485/D485 Setup can also be used for troubleshooting and diagnostic of the

P485 and the serial network during runtime.

SYSTEM REQUIREMENTS The following hardware and software is required to use the EnerVista P485/D485 Setup software.

• Pentium 133 MHz or higher

• 10 MB of free space on the hard drive

• 8 MB RAM

• Windows 95/98/NT/2000/XP

• Internet Explorer 4.01 SP1 or higher

	Installation procedure
DESCRIPTION	There are two different ways of installing EnerVista P485/D485 Setup; either via the GE
	EnerVista CD or from the GE Multilin website at http://www.GEmultilin.com.
INSTALLING FROM	Run ‘setup.exe’ and follow the on screen instructions
ENERVISTA CD
INSTALLING FROM THE	Download the self-extracting EXE file from the GE Multilin website at http://
GE MULTILIN WEBSITE	www.GEmultilin.com.

P485 MODBUS TO PROFIBUS CONVERTER – USER GUIDE 4–1