Giant 2002 Motorized Bicycle owner manual Do not Push the Refresh Button on, Charger

Step 1 . Hold the battery and turn the key of the battery lock anti-clockwise to open.

Step 2. Move the battery 45º sideways. Eject the grip and lift the battery out of the holder.

Step 3. Place the battery in a stable position, in such a way that the energy indicator is visible.

Step 4. Remove the cap from the battery’s charging socket, which is located at the bottom of the battery.

Step 5. Put the charger plug into the battery’s charging socket with the arrow mark UP.

arrow mark

Step 6. Connect the power source plug into an electric point (AC 220~230 volts) and make sure that all poles are fully inserted into the socket.

Keep the area where the battery is charged well ventilated and free from litter or anything else combustible to avoid fire from sparks or overheating.

Step 7. DO NOT PUSH THE “REFRESH” BUTTON ON THE

CHARGER.

For “REFRESH-charging” see section 5.1.3 (below). The lamp located on the charger will illuminate RED, indicating that electricity is flowing into the battery.

•First, the lamp blinks RED for a few seconds, then it gives steady RED light when charging and

•blinks slowly after approx. 4~5 hours (in case of full charge), indicating that the battery has reached full capacity and charging has completed.

49