Troubleshooting | USER GUIDE |
| 131 |
6.1ERROR MESSAGES
Caution!
Be careful when you attach/remove the components to/from the camera. This will help prevent damage to the data bus connections.
If any error message is displayed
1Remove the components from the camera.
2Attach the components to the camera again.
If the error message is still displayed
1Remove the battery.
2Wait 10 seconds.
3Attach the battery again.
The Camera processor is now reset.
If the error message is still displayed
1 Write down the error message.
2 Contact your closest authorized Hasselblad dealer.
X1D | Table of Content | www.hasselblad.com |
