Henny Penny OFG-391 manual Gas fryers only See ignition modules

	Model OFG- 391
power/pump switch	a three-way switch located on the front control panel of the fryer that serves as
	an off/on switch and a filter switch
product	a food item cooked in the fryer
rack	the wire grid that slides into the carrier to hold product during the cook cycle
setpoint	a preset cooking temperature; the setpoint is a programmable feature
shortening mixing system	an automatic system on eight head fryers hat periodically uses the filter pump to
	mix the shortening in the frypot to prevent an accumulation of moisture to
	minimize the boiling action in the frypot
shortening shuttle	optional equipment used for shortening disposal
sift breading	the process of removing clumps from breading
spark igniters	the igniters that create a spark to ignite the pilot lights on gas fryers
(gas fryers only)	(see ignition modules)
standpipe	the pipe through which oil is pumped back into the frypot after the filtering
	process is complete
standpipe assembly	the pipe and fittings that are part of the shortening filtering process
straight brush	a brush that is included with the fryer that is used to clear the drain in the bottom
	of the frypot
temperature probe	a round probe that is located in the inside of the frypot that measures the
	temperature of the oil in the frypot; the temperature probe communicates with the
	control panel
thermal protector	overheat protection swtich for the filter motor that must be manually reset if
	tripped

503 G-4