Property Sheet Chapter 3
3. "Paper" Property Sheet
(3)Paper Size
Select the size of the paper to be used for printing.
NOTE
If a paper size that does not match the paper loaded in the machine is selected, the machine will give a message that prompts you to add paper in Drawer1, entering a standby state. If Bypass has been selected, the machine will issue a message that prompts you to load paper in the manual feed port, entering a standby state.
(4) Paper Source
Select the paper source to be used by the machine.
Available options are limited depending on the type of paper source mounted in the machine.
• Auto | : Automatically selects the paper source in which paper of the |
| size specified by Paper Size is loaded. |
• Drawer 1 to Drawer 5, LCC | |
| : Prints on paper loaded in the specified paper source (Drawer). |
• Bypass | : Prints on paper loaded in the Multi Bypass Tray. |
NOTES
•It is possible that an option cannot be selected depending on the paper size. For details, see the Operator’s Manual of the machine.
•If "OHP Interleaving" or "Cover Mode" is selected, "Paper Source" will appear dimmed.
TIPS
•The paper source type is set with Device Option.
•The machine preview shows the paper source to be used.
