5. "Graphics" Property Sheet
(9) Halftone
Allows you to select the desired
• Use Printer’s settings: Uses the settings made on the printer.
• Use settings below : Set the number of lines per inch and the angle of pattern. Adjust these settings if Moiré occurs when printing a fine image such as a photo.
Screen frequency
Set the number of lines for the screen. Setting value : 1 to 600 (step: 1)
Screen angle
Set the angle for the screen. Setting value : 1 to 360 (step: 1)
NOTE
Usually, use the default values.
(10)TrueType fonts
•Send TrueType fonts to printer according to the font
:Transmits TrueType fonts according to table correspondence.
[Edit the table...]: <Only when opened from the control panel>
Displays a screen on which the system fonts (Device fonts) are assigned to the PC fonts (TrueType fonts).
•Always use
:Uses the printer fonts at all times.
•Always use TrueType fonts: Transmits the TrueType fonts at all times.
(11)Special
Specify reversal of toner arrangement between black and white and mirror image.
•Negative Image: Reverses toner arrangement between black and white.
• Mirror Image : Reverses the image as if the original were viewed in a mirror.
Property Sheet Chapter 3
