3. "Paper" Property Sheet
NOTES
•Select "Elevator Tray" for "Paper Output" when Staple is to be used.
•The stapling position varies between the upper left corner and upper right corner depending on the direction of the paper loaded and the printing orientation.
•If the number of sheets of paper exceeds the limit that the Finisher or Mailbin Finisher can handle, the stapling function may be canceled.
•If the original document for a print job contains a page with a different size from the others and this document is printed, the Staple setting may be canceled.
•If the original document for a print job contains a page with a different direction from the others, care should be used because the stapling position is determined according to the direction of the first page.
•It is possible that an option cannot be selected depending on the paper size. For details, see the Operator’s Manual of the machine.
TIP
The print preview allows you to check for the stapling position.
(10)Setting preview
Displays the icons corresponding to the settings made for the printer driver. It allows you to identify which functions are currently enabled.
For the setting preview listing, see p.
(11)Copies
Set the number of copies to be made. Directly type the number, or click [▲] or [▼] to arrive at the desired number.
Setting range : 1 to 999
NOTE
Set "1" in "Copies" when using OHP Interleaving and manual feed copying.
(12) Orientation
Select the orientation of the image. The selected orientation may be checked with the paper preview.
• Portrait | : Prints the document across the narrower dimension of the paper. |
• Landscape | : Prints the document across the wider dimension of the paper. |
Property Sheet Chapter 3
