3. "Paper" Property Sheet
"Security" Dialog Box
This dialog box is used to enter the access number and the password for a Lock Job.
(1)
(2)
4608P019CC
(1)Enter the access number of the job. Setting value : 0001 to 1000 (4 digits)
(2)Enter the password for the Lock Job. Setting value : 0000 to 9999 (4 digits)
NOTES
•If the [Cancel] button is clicked in the Windows 95/3.1 driver, the data is transmitted without specifying Access Code or Lock Job. It is not the cancellation of data transmission.
•When Access Code is used, printing may not be effected unless the access number has been correctly set. It is possible, by using the utility that comes with the NIC Board (option), to check on the personal computer screen to see whether the job has been canceled or not.
Displaying the "Security" Dialog Box
<Windows 95>
The dialog box appears when the [OK] key is clicked on the "Printer" dialog box if "Access Code" or "Lock Job" has been selected.
<Windows NT 4.0/NT 3.51>
The dialog box appears immediately after "Access Code" or "Lock Job" has been selected.
<Windows 3.1>
The dialog box appears when "Print" of "File" is selected if Access Code or Lock Job has been selected.
Property Sheet Chapter 3
