4-37

13. Using the Lock Job Function

Procedure Applicable to Windows 3.1

1.Set up printing on the application that has been used to create the document. Normally, select "Print Setup..." from the "File" menu to set up for printing.

2.The Print Setup dialog box will appear.

Check that "Digital Copier 35cpm PCL5e" is displayed for "Name" under "Printer" and click the [Options...] button.

NOTE

Some applications allow you to set Copies and Collate (Sort) in the Print dialog box. To ensure proper printing operation, however, turn OFF these items of the application and make the necessary settings in each property sheet of the printer driver.

3.The "Digital Copier 35cpm PCL5e Properties" dialog box will appear.

4.Check that the size of the document created with the application is displayed in "Paper Size."

5.Click the [Advanced] button and select "Lock Job."

6.Click the [OK] button to go back to the Paper property sheet.

7.Make other settings as necessary and click the [OK] button.

8.The Print Setup dialog box will reappear. Click the [OK] button to go back to the application.

9.Run the print cycle from the application with which the document has been created. To run a print cycle, select [Print] from the [File] menu.

10.The Security dialog box appears. Type your password and click the [OK] button.

11.Then, the data is transferred to the machine. At this time, however, printing does not immediately start.

NOTE

Convenient Functions Chapter 4

When the [Cancel] button is clicked on the Security dialog box, the data is transmitted with Access Code and Lock Job not specified. It does not mean the cancellation of data transmission.

Page 141
Image 141
Hitachi Koki USA Hi-35pc user manual Procedure Applicable to Windows