Property Sheet Chapter 3
3. "Paper" Property Sheet
TIPS
•When the machine is equipped with a Shift Tray, or if "Elevator Tray" is selected when the machine is equipped with a Finisher or Mailbin Finisher, sets or stacks are stacked in a sawtooth manner so that each is easy to identify.
•If a Job Tray is mounted, or if none of the finishing options is mounted, sets or stacks are stacked in a crisscross manner.
•The followings are the minimum requirements for enabling crisscross sorting with the Collated setting:
The stacks of paper of the same size are loaded in the lengthwise and crosswise direction.
Staple,
(7)Machine preview
The machine preview shows the set paper source and exit tray. For a listing of machine preview formats, see p.
(8)Hole Punch <when Finisher or Mailbin Finisher is mounted>
Select whether to punch holes in the printed pages.
• None | : Does not punch holes. |
•Short Edge : Punches holes along the short edge of the document.
•Long Edge : Punches holes along the long edge of the document.
NOTES
•It is possible that no holes are made depending on the paper size and the specified hole position. For details, see the Operator’s Manual of the machine.
•Holes may not be punched if Long Edge is selected with manual feed copying.
TIPS
•The number of holes to be made is set with Device Option.
•The print preview displays the positions of the holes to be made.
(9) Staple <when Finisher or Mailbin Finisher is mounted> Select whether to staple each copy set of the document.
• None : Does not staple the printed pages.
• Corner : Staples each copy set at the upper left corner.
