Honeywell IV REV B Default Schedules, Day of the Week, Creating a Simple Schedule By Example

Setup Options

Default Schedules

Default Schedule 1

All cameras are set to: 8AM-5PM. Continuous recording 5PM-8AM Motion recording

Default Schedule 2

All cameras are set to: Motion recording 24 hours/day, 7 days/week.

Camera 1 associated to sensor input 1

Camera 2 associated to sensor input 2

Camera 3 associated to sensor input 3, etc.

Note Default Schedule 1and Default Schedule 2 are not configured for use with sensors/alarms.

Day of the Week

The Day of Week is the day of the week for which the schedule is being edited. If WED is checked, Wednesday’s schedule is being edited.

The Single Selection Mode button allows selection of multiple days at once.

By selecting the Single Selection Mode button placing multiple checks in the boxes is allowed, thereby selecting multiple days simultaneously.

Clicking on Single Selection Mode will change the button to Multi Selection Mode. This allows you to select multiple days to configure at once.

Creating a Simple Schedule (By Example)

Creating schedules is easy with a little experience. In the following example, the steps for creating a simple schedule for cameras 1 to 4 are detailed.

The schedule will be as follows:

•MON-FRI (9AM-5:59PM) all 4 cameras will record using MOTION recording.

•MON-FRI (6PM-8:95AM) all 4 cameras will record using CONTINUOUS recording.

•SAT-SUN (12AM-11:59PM) all 4 cameras will record using MOTION recording.

Using these examples, a total of 3 schedules will be created.

________________________________________________________________________________________________________

60