Setup Options
Video Loss Alarm
The DVR supports a Video Loss Alarm function which allows an Alarm Event to occur when a camera loses its signal. The lost signal can be due to camera power failure to the camera, the camera cable being cut or unplugged, or the camera being damaged in some way.
In order to use Video Signal Loss detection, cameras must either be Enabled or Disabled. This is because the DVR needs to know which cameras it should expect to receive signals from. To enable camera(s), open Frame Setup, and set the Images Per Second to anything above zero. By designating zero images per second the camera will not be used by the DVR.
Activate Audio Alarm (BEEP)
When video loss occurs, an internal speaker on the DVR will sound an alarm.
Video Loss Alarm Log
When video loss occurs, the event is recorded in the DVR log.
Activate Alarm Output
When video loss occurs, an alarm (control) output is activated.
Volume
The volume control allows fine tuning of the volume settings on the recorder.
Volume Options:
•Speakers – Used to adjust the volume for all sound coming from the system’s speakers
•System Sounds – Used to adjust the volume for the system sounds exclusively.
________________________________________________________________________________________________________
52
