Fusion IV DVR User Guide

Voice Warning

The recorder allows users to play a sound file when either a Motion event or Sensor event occurs. This file can be a custom created sound file that is unique to the application. The selected WAV file is played through speakers attached to the recorder.

Test Sound File

Locate Sound File

1.Click the Open Sound File icon to browse for a WAV file. The selected file will display in the box on the left.

2.Click the Test icon to verify the audio file.

3.Select Activate on Motion, Activate on Sensor (Alarm), and or Activate on Sabotage Detection to trigger the audio file.

Intensive Recording Overview

The Intensive Recording option allows an increase of the Images Per Second of any analog or IP camera recording in the MJPEG codec using sensor or motion activation. H-series models use only sensor activation.

Enabling Intensive Recording

The Intensive Recording option is set up as an ‘All or Nothing’. This means that once enabled (associated with sensors) all cameras that are associated with sensors will activate the Intensive Recording.

To activate the Intensive Recording option, follow these steps.

1.Click the General tab.

2.Select the Intensive-on Sensor and/or Intensive on Motion check boxes.

3.Open Schedule under Setup Options. Select the Sensor option.

4.Enable the sensor by creating a schedule for it.

5.Click Apply and exit setup.

________________________________________________________________________________________________________

Document 800-05305V1 Rev B

51

10/11

 

Page 51
Image 51
Honeywell IV REV B user manual Voice Warning, Intensive Recording Overview, Enabling Intensive Recording