Fusion IV DVR User Guide
Enable Sabotage Detection
The Camera Sabotage Detection feature will notify users that the field of vision of a camera has been compromised, abruptly changed, or detects significant vibration. To enable Sabotage Detection:
1.Select the Enable Sabotage Detection check box.
2.Set the threshold percentage to reduce false alarms.
3.Select the Beep on Detect check box – or – select a Relay to activate on detection.
Create a Motion Area
1.Click Motion in Setup.
2.Select a camera from the Select Camera list.
3.Select the Detect Detail Motion Area check box.
4.Click Clear.
5.Click Advanced Motion Area Setup.
6.Click a Motion Detection Area shape button.
7.Drag the mouse over the camera image.
Note To create a polygon shape, click the mouse at each point and
8.Click OK.
9.Move the sliders to adjust motion sensitivity and the noise filter.
10.Define the
Pre Alarm – 0 > 50 Seconds [The number of seconds the recorder records before motion is detected]
Post Alarm (MOTION) – 0 > 50 Seconds [The number of seconds the recorder records after motion is detected]
________________________________________________________________________________________________________
Document | 49 |
10/11 |
|
