Setup Options
Activate PTZ Preset on Sensor
Create a PTZ Preset Position. See instructions in the PTZ Setup chapter.
1.Click Setup on the Live View screen.
2.Click Sensor.
3.Click Sensor Preset.
4.Select the desired camera from the Channel list.
5.Select the appropriate Sensor from the list.
6.Select the preconfigured PTZ Preset from the list.
7.Click Set. A list of configured Sensor Presets will display in the box below.
8.Repeat for additional sensors.
9.Click OK to close the Sensor Preset window.
Hybrid Sensor Setup
This interface is used to link Hard Contact Sensor Inputs from supported Network
Devices to the recorder software.
________________________________________________________________________________________________________
70
