Honeywell VISTA-10P Zone List Overview ∗81 Menu Mode, Zone List Programming, Prompt, Explanation

Zone List Overview (∗81 Menu Mode)

Zone lists let you group individual zones for use with certain system actions. The following table shows the available zone lists and their purposes:

List No.		Used for…
1, 2	general purpose
3	chime-by-zone
4	cross zones
5	night stay zones
6		general purpose
		VISTA-10PSIA	: dial delay disable
7		general purpose
		VISTA-10PSIA	: unlimited reports
8		general purpose
9	zones that activate Pager 1

Zone List Programming

Zone List programming involves:

1.Selecting an appropriate zone list number;

2.Adding the desired zone numbers to be included in that list.

Start Zone List Program Mode by pressing ✱81 while in Data Programming mode. The following prompts are displayed:

*81 Menu Mode
	PROMPT		VALID ENTRIES	EXPLANATION
			Enter the Zone List Number to program (or 00 to end these entries).
	Zone List No.
			01-09 = zone list number
	(00 = Quit)	01
			[∗] to continue
			Enter each zone number followed by [∗] to add each zone to the zone list.
	01 Enter Zn Num.
			01-06 = wired zones; 09-24 = wireless zones; 49-56 = button zones
	(00 = Quit)	00
			91 = addr. device report enable (Enter a report code for zone 91 to enable addressable device
			reporting.
			92 = duress report enable (Enter a report code for zone 92 to enable duress reporting)
			95, 96, 99 =emergency zones
			00 to continue

IMPORTANT: Do not include fire zones in zone lists that are used to STOP device actions.

		To delete the zone list, enter 1. All zones in the zone list will be deleted automatically and
01 Del Zn List?
		the system returns to the Zone List No. prompt.
0 = No 1 = Yes	0
		To save the zone list, enter 0.
		[∗] to continue
		To save the entire zone list, enter 0 and the system returns to the Zone List No. prompt.
01 Delete Zone?
		To delete a zone or zones in a zone list enter 1 to continue.
0 = No 1 = Yes	0
		[∗] to continue
		Enter each zone to be deleted from the list followed by [∗] to accept each zone.
01 Zn to Delete?
		01-64 = zones to be deleted from list
(00 = Quit)	00
		00 when done to return to the Zone List No. prompt

NOTES:

•Any list may include any or all of the system's zone numbers.

•A zone list can be assigned to more than one output relay.

•When creating zone list 4 for cross zoning, include only zones assigned to zone types 3, 4, or 5. Do not include zones that have delays (entry/exit zones, interior w/delay) or 24-hour zones, as these zone types may produce unpredictable operation and may not function as intended. See field *85 for Cross Zone Timer option.

•Zone List 6: VISTA-10PSIA: See field *50 for Dial Delay Disable option.

•Zone List 7: VISTA-10PSIA: See field *93 for Unlimited Reports option.

5-9