Honeywell VISTA-10P Keypad Functions, Voice Keypads, Keypad Commands, Summary Of Arming Modes

Keypad Functions

The following is a brief list of system commands. For detailed information, see the User's Manual.

Voice Keypads

The 6150V/6160V Voice Keypads provide the following features:

•Message Center, which lets the user record and playback one message.

•Voice Status, which can announce system status by using the STATUS key.

•Voice Chime, which can alert users to the opening of doors/windows while the system is disarmed. Refer to the User Guide for specific procedures for activating and using these features.

Keypad Commands

Function	Description
Silence alarms	Pressing any key will silence the keypad sounder for 10 seconds. Disarming the
	system will silence both keypad and external sounders.
Quick Arm	If enabled (field ∗21), you can press [#] in place of the system's security code, plus
	the desired arming key (Away, Stay, Instant, Maximum)
Single-Button arming	If programmed (*57 Function Key menu mode), lettered keys A-D can be used for
	arming, using options 3-AWAY, 4-STAY, 5-NIGHT-STAY, or 6-Step-Arming
	If used, no security code is required to arm the system.
Alarm Memory	When the system is disarmed, any zones that were in an alarm condition during the
	armed period will be displayed. To clear this display, simply repeat the disarm
	sequence (enter the security code and press the OFF key) again.
Arming Away	Enter code + AWAY [2] or simply press appropriate lettered key on the keypads (see
	“Single-Button Arming” above). If the “Auto-Stay Arm” feature is enabled (field *84)
	and the entry/exit door is not opened and closed within the programmed exit delay
	time, the system will automatically arm in STAY mode if armed from a wired
	keypad (non-RF device). If the door is opened and closed within the exit delay
	period, the system arms in AWAY mode.
Arming Stay	Enter code + STAY [3] or simply press appropriate key on the keypads (see “Single-
	Button Arming” above). See “Arming Away” above for Auto-Stay arming feature.
Arming Night-Stay	Enter code + STAY [3] + STAY [3] or simply press appropriate key on the keypads
	(see “Single-Button Arming” above).
Arming Instant	Enter code + INSTANT [7].
Arming Maximum	Enter code + MAXIMUM [4] or simply press appropriate lettered key on the
	keypads (see “Single-Button Arming” above).

Disarming	Enter code + OFF [1]. If entry delay or an alarm is active, you do not need to
	press OFF.
Bypassing Zones	Enter code + BYPASS [6] + zone number(s).
Forced (Quick) Bypass	To automatically bypass all faulted zones, use the “Quick Bypass” method. Enter
	code + BYPASS + [#], then wait for all open zones to be displayed. Arm when
	display indicates “ZONE BYPASSED” and “READY TO ARM”.
Chime Mode	Enter code + CHIME [9]. To turn chime off, enter code + CHIME again.
Activate Output Devices	If relay outputs are used, two keypad entries available to the user are included. If
	programmed, these entries can be used to manually activate or deactivate the
	device(s) for starting or stopping some action, such as turning lights on or off, etc.
	These keypad entries are:
	[Security Code] + # + 7 + [2-digit Device #] activates (starts) that device.
	[Security Code] + # + 8 + [2-digit Device #] deactivates (stops) that device.

SUMMARY OF ARMING MODES

Arming Mode		Features for Each Arming Mode
	Exit Delay	Entry Delay	Perimeter Armed	Interior Armed
AWAY	Yes	Yes	Yes	Yes
STAY	Yes	Yes	Yes	No
NIGHT-STAY	Yes	Yes	Yes	only those zones
				listed in Night-
				Stay zone list
INSTANT	Yes	No	Yes	No
MAXIMUM	Yes	No	Yes	Yes

6-5