HP 2505AT, 2186AF, 2182US To replace the hard disk drive holder, Replacing the Hard Disk Drive

Models: 2521EU 2530AI 2104EA 2102FD 2111EU 2508EU 2505EU 2164EA 2565EA 2561AH 2539AI 2523EU 2526AH 2538AI 2156AE 2126EU 2100 (Intel) 2120EU 2123EA 2116EU 2118EU 2509AT 2511EU 2168EA 2161AD 2175US 2181AF

1 118
Download 118 pages 32.24 Kb
Page 69
Image 69
To replace the hard disk drive holder

Add-On Devices

Replacing the Hard Disk Drive

To replace the hard disk drive holder

If you are installing a new hard drive that does not have a holder, you can remove the holder parts from the old hard drive. You’ll need a small Phillips screwdriver for this procedure.

1.Remove the four screws from the sides of the holder and drive case, then slide the drive out of the holder.

2.Notice that the hard drive has a pin connector attachment at one end. Carefully remove this connector from the end of the drive. Work alternately at each end so that the connector slides off evenly without bending the connector pins.

3.Carefully put the pin connector attachment back onto the pins on the end of the new hard drive. Work alternately at each end so that the connector slides on evenly without bending the connector pins.

4.Insert the drive into the holder.

5.Reinstall the screws into the holder and drive case.

62 Reference Guide

Page 69
Image 69
HP 2505AT, 2186AF, 2182US, 2182AT, 2182AF, 2181AF, 2180EA To replace the hard disk drive holder, Replacing the Hard Disk Drive