HP 2113AH, 2186AF, 2182US, 2182AT, 2182AF, 2181AF, 2509 Russia, International, Regulatory Information

Models: 2521EU 2530AI 2104EA 2102FD 2111EU 2508EU 2505EU 2164EA 2565EA 2561AH 2539AI 2523EU 2526AH 2538AI 2156AE 2126EU 2100 (Intel) 2120EU 2123EA 2116EU 2118EU 2509AT 2511EU 2168EA 2161AD 2175US 2181AF

1 118
Download 118 pages 32.24 Kb
Page 114
Image 114
Russia

Reference Information

Regulatory Information

PTC200 7.5.2 (3) (4) Ringer Sensitivity

This device may be subject to ringing or bell tinkle when certain other devices are connected to the same line. If this occurs, the problem should not be referred to the Telecom Faults Service.

Associated Software Limits of Compliance

Some parameters required for compliance with Telecom’s Telepermit requirements are dependent on the application software or PC equipment associated with this device. The application software shall be set to operate within the following limits for compliance with Telecom’s specifications:

The S0 register must contain a value of 0 for no auto-answer or a value of 2 for auto-answer.

The S6 register must contain a value of 2, 3, 4, 5, 6, or 7. The factory default of 2 is recommended. The S7 register must contain a value less than 90. The factory default of 72 is recommended.

The S10 register must contain a value less than 150. The factory default of 14 is recommended. The S11 register must contain a value greater than 60. The factory default of 95 is recommended.

There shall be no more than 10 call attempts to the same number within any 30-minute period for any single manual call initiation.

The equipment shall go on-hook for a period of not less than 30 seconds between the end of one call attempt and the beginning of the next attempt to the same number.

Automatic calls to different numbers shall be not less than 2 seconds apart.

Failure to set these parameters correctly could negate the User Rights under the Telecom Terms of Service.

Russia

 

International

 

Products sold internationally by the manufacturer and its authorized dealers meet the

 

specifications listed on the following page.

 

 

Note

For regulatory identification purposes, your product is assigned a Regulatory

 

Model Number. The Regulatory Model Number for your product is listed in the

 

declaration below. This regulatory number is different from the marketing name

 

and product number.

 

 

108 Reference Guide

Page 114
Image 114
HP 2113AH, 2186AF, 2182US, 2182AT, 2182AF, 2181AF, 2180EA, 2180AF, 2180CA, 2179AF Russia, International, Regulatory Information