USING PAPER, CARDS, ENVELOPES, TRANSPARENCIES, AND LABELS

••••••••••••••••••••••••••••••••••••••••••••••••••• ••••••••••••••••••••••••••••••••••••••••••••••••••• ••••••••••••••••••••••••

Using Non-Standard Size Paper

Use this procedure to print on non-standard size papers with your HP DeskJet 670C Series printer. Paper sizes that are considered non-standardare those with a width between 5 and

8.5 inches (127 and 215 mm) and a length between 5.83 and 14 inches (148 and 356 mm).

1.Slide the paper width adjuster to its leftmost position.

2.Pull out the paper length adjuster and remove any paper from the IN tray.

Paper Width

Adjuster

Paper Length

 

Adjuster

2184037

N O T E

Make sure the card guide (used when printing on index cards and postcards) is in the down position. (See the drawing on page 36 in the procedure Using Index Cards and Postcards for the location of the card guide.)

3.Remove up to a 1/2 inch (1 cm) stack of paper from its package and tap the short edge of the stack on a flat surface to even the stack.

4.Insert the non-standard size paper evenly into the IN tray, print side down, until it stops.

••••••••••••••••••••••••••••••••••••••••••••••••••• ••••••••••••••••••••••••••••••••••••••••••••••••••• ••••••••••••••••••••••••

33