PRINTING FROM DOS

••••••••••••••••••••••••••••••••••••••••••••••••••• ••••••••••••••••••••••••••••••••••••••••••••••••••• ••••••••••••••••••••••••

Typically, duplicate print settings that are selected from a DOS software program override print settings selected in the

HP DeskJet Control Panel for DOS.

This is the HP DeskJet Control Panel for DOS.

Your HP DeskJet Control Panel for DOS may vary from this example.

To access the HP DeskJet Control Panel for DOS, type DJCP at the DOS (C:\>) prompt.

C:\>DJCP

After the HP DeskJet Control Panel for DOS appears, you can activate its selections in one of two ways:

With the mouse — Move the mouse to position the pointer on the desired selection, then click the left mouse button.

With the keyboard — Press the key that corresponds to the highlighted letter in the selection name.

Help in the HP DeskJet Control Panel for DOS

For information on the HP DeskJet Control Panel for DOS, select the About This Program button on the HP DeskJet Control Panel for DOS screen.

Also, context sensitive help appears at the bottom of the control panel screen as print selections

Refer to the readme file, README2.TXT, for more information. The README2.TXT file is located in the C:\DESKJET directory.

••••••••••••••••••••••••••••••••••••••••••••••••••• ••••••••••••••••••••••••••••••••••••••••••••••••••• ••••••••••••••••••••••••

81

Page 69
Image 69
HP 670C manual Help in the HP DeskJet Control Panel for DOS