For more information, visit the HP Web site (www.hp.com/support) for the latest troubleshooting information, or product fixes and updates.

Light description/Light pattern

All lights are off.

The Power light is on.

The Power light blinks.

The Power light and the Resume light blink.

The Power light is on and the Resume light blinks.

Explanation and recommended action

The device is off.

Connect the power cable.

Press (Power button).

The device is ready.

No action is required.

The device is turning on or off, or is processing a print job.

No action is required.

The device is pausing for the ink to dry.

Wait for the ink to dry.

Print media is jammed in the device.

Remove all media from the output tray. Locate and clear the jam. For more information, see Clear a jam in the device.

The device carriage has stalled.

Open the top cover and remove any obstructions (such as jammed media).

Press (Resume button) to continue printing.

If the error persists, turn the device off, and then on again.

The device is out of paper.

Load paper and press (Resume button).

The media width setting does not match the media loaded.

Change the media setting in the print driver to match the media loaded. For more information, see Print on special and custom-sized media

Interpreting control-panel lights

109

Page 113
Image 113
HP 7000 manual Light description/Light pattern