Chapter 3

9.After the software is installed, connect the device to your computer.

10.Press the Power button to turn the device on.

After connecting and turning on the device, you might have to wait several minutes for all of the Plug and Play events to complete.

11.Follow the onscreen instructions.

When the software installation is complete, the HP Digital Imaging Monitor icon appears in the Windows system tray.

To uninstall from a Windows computer, method 2

NOTE: Use this method if Uninstall is not available in the Windows Start menu.

1.On the Windows taskbar, click Start, select Control Panel, and then click Add/ Remove Programs.

- Or -

Click Start, click Control Panel, and then click Uninstall a program.

2.Select the device you want to uninstall, and then click Change/Remove or Uninstall/ Change.

3.Disconnect the device from your computer.

4.Restart your computer.

NOTE: It is important that you disconnect the device before restarting your computer. Do not connect the device to your computer until after you have reinstalled the software.

To uninstall from a Windows computer, method 3

NOTE: Use this method if Uninstall is not available in the Windows Start menu.

1.Insert the device installation CD into your computer's CD-ROM drive, and then start the Setup program.

2.Disconnect the device from your computer.

3.Select Uninstall and follow the onscreen directions.

4.Restart your computer.

NOTE: It is important that you disconnect the device before restarting your computer. Do not connect the device to your computer until after you have reinstalled the software.

To uninstall from a Macintosh computer

1.Open the Finder.

2.Double-click Applications.

3.Double-clickHewlett-Packard.

4.Double-click HP Uninstaller.

5.Select your device, and then double-click Uninstall.

42 Configure and manage

Page 46
Image 46
HP 7000 manual To uninstall from a Macintosh computer, Double-clickHewlett-Packard