HP 7000 manual Nothing happens when I try to print, Solution 1 Turn on the product

Chapter 4

Nothing happens when I try to print

Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved.

•Solution 1: Turn on the product

•Solution 2: Load paper in the input tray

•Solution 3: Select the correct printer

•Solution 4: Check the printer driver status

•Solution 5: Wait until the product completes the current operation

•Solution 6: Remove all cancelled print jobs from the queue

•Solution 7: Clear the paper jam

•Solution 8: Make sure the print carriage can move freely

•Solution 9: Check the connection from the product to your computer

•Solution 10: Restart the product

Solution 1: Turn on the product

Solution: Look at the Power light located on the product. If it is not lit, the product is turned off. Make sure the power cord is firmly connected to the product and plugged into a power outlet. Press the Power button to turn on the product.

Cause: The product was turned off.

If this did not solve the issue, try the next solution.

Solution 2: Load paper in the input tray

Solution: Load paper in the input tray.

For more information, see:

Load media

Cause: The product was out of paper.

If this did not solve the issue, try the next solution.

Solution 3: Select the correct printer

Solution: Make sure you have selected the correct printer in your software application.

TIP: You can set the product as the default printer to ensure that the printer is automatically selected when you select Print in the File menu of your different software applications.

Cause: The product was not the selected printer.

If this did not solve the issue, try the next solution.

62 Maintain and troubleshoot