CAUSE: Print Master is connected to
SOLUTION: Make sure Print Master is connected to designated PC COM port. Check using TERM program. Turn Print Master off and you should not see CTS/DSR lines toggle if you are on a
CAUSE: PC is connected to Print Master port which is configured as an printer port.
SOLUTION: Enter Print Master's configuration mode and in the Status menu, check the port's assignment.
CAUSE: LPTX not rerouted to COMX port for PC serial communication.
SOLUTION: Reroute LPT port as follows: MODE LPTX:=COMX (X = 1, 2 or 3)
CAUSE: Print Master is in configuration mode.
SOLUTION: Exit configuration mode or recycle power.
94
