500 SERIES MULTIPORT CONTROLLERS
Included in the 500 Series line of multiport controllers are units intended for the following applications:
Port Expansion (A-Series):Allows a single serial port on a computer to individually access up to 17 peripheral devices with full duplex communication.
Single Port Contention (DQ-Series): Allows up to 17 terminals to contend for a single port on a computer system.
Multiple Port Contention (B-Series): Allows either 6, 8 or 12 terminals to contend for either 3, 4 or 6 computer ports respectively.
Networking (F-Series):Networks either 5 or 9 ports together, i.e., allows any port to connect to any other port on the multiport controller. These also have host port control which allows a host computer system to make and/or break any connection between two ports on the multiport controller.
Broadcasting (G-Series):Will simultaneously broadcast whatever data is received on the host port out to either 4 or 8 peripheral devices while sending data from a single selected peripheral device back to the host device. This unit is also capable of operating in a port expansion mode such as the A-Series.
Auto T-Switch(T-Series):Allows a group of up to 6 terminals to switch between two computer systems.
NOTE: All ports on the 500 Series are standard with EIA-232 ports. EIA-422 and Current Loop ports are optionally available.
If you have questions concerning any of BayTech's products, please feel free to call a BayTech Applications Engineer at either (800)523- 2702 or (228)467-8231.
