&
By responding to the Enter Request: message at the end of the main configuration menu with "3" (Set Input Inactivity Timeout), you may set the input inactivity timeout. Print Master will automatically disconnect the computer if no characters are received for the specified timeout period.
Print Master will respond with:
Timeout is................................20 seconds
Enter Timeout (0 to 200), hit return.....:
Type the number of timeout seconds that you wish from 0 to 200, followed by <ENTER>.
WARNING: If you type <ENTER> without entering a value in response to the prompt, the input inactivity timeout will automatically set to 0 (zero) seconds, disabling the timeout.
CAUTION: Do not set the input inactivity timeout to zero seconds when Printer Select Mode 1 has been selected. Mode 1 recognizes the end of a print job by input inactivity timeout only. It does not recognize a manual disconnect.
Print Master will save the new input inactivity timeout permanently in
55
